- Home
- Equipment
Refine by
Pt Limited Environmental Equipment & Supplies
52 equipment items found
Manufactured by:PT Limited based inAuckland, NEW ZEALAND
The PT9011OVL is a tool steel beam sealed to IP67, electroless nickel plated and ideally suited to onboard vehicle weighing. The PT9011OVL can also be used in standard weighing installations where a rigid connection is required to keep the load in place and can support various axels or bearings in industrial weighing. Each load cell comes with the standard PT Ltd serial numbered accuracy ...
Manufactured by:PT Limited based inAuckland, NEW ZEALAND
The SLSP Stainless Steel Sensor Pin series of load measurement pins are designed for general use. They are machined from high tensile stainless steel and are normally supplied complete with anti-rotation flats or plates. The standard sensor pin is supplied exactly as per the technical data sheet and is ordered by specific part number for each capacity. However the nature and style of the SLSP ...
Manufactured by:PT Limited based inAuckland, NEW ZEALAND
High accuracy 5 - 40 MPa (725 - 5795 PSI) 4-20mA output. The HPT03 are high accuracy stainless steel pressure transducers sealed to IP67 with M14x1.5 connection and standard ISO 4400/DIN 43650 Form A electrical connections and are suitable for measuring the pressure of all types of non-crystalline liquids and gasses that are not rapidly changing, in industries such as aerospace, automotive, air ...
Manufactured by:PT Limited based inAuckland, NEW ZEALAND
High accuracy 15 - 100 MPa (2000 - 14500 PSI) mV/V output. The HPT02 are high accuracy stainless steel pressure transducers sealed to IP67 with standard mechanical and electrical connections and are suitable for measuring the pressure of all types of non-crystalline liquids and gasses that are not rapidly changing, in industries such as aerospace, automotive, air conditioning, oil and ...
Manufactured by:PT Limited based inAuckland, NEW ZEALAND
High accuracy 5000 - 10000 PSI (34.5 - 69 MPa) mV/V output. The HPT04 are high accuracy stainless steel pressure transducers sealed to IP67 with SAE/ISO connection and standard electrical connections and are suitable for measuring the pressure of all types of non-crystalline liquids and gasses that are not rapidly changing, in industries such as aerospace, automotive, air conditioning, oil and ...
Manufactured by:PT Limited based inAuckland, NEW ZEALAND
(100kg ~ 50,000kg) Compression No 1 Selling Model. The Accupoint epitomizes quality in weighing measurement devices. Incorporating top level protection while maintaining performance specifications, the Accupoint improves safety whilst reducing load cell damage and plant down ...
Manufactured by:PT Limited based inAuckland, NEW ZEALAND
(50kg~10t Nickel Plated Tool Steel) Lower profile standard. The LS is one of the few true low profile shearbeam loadcells. If height is an issue with your application, consider a 1t shearbeam at only 24mm high, similar space savings are seen across the LS series. Known and recognised by its keyhole feature, the LS is used extensively in airport baggage scales and all types of above and in-ground ...
Manufactured by:PT Limited based inAuckland, NEW ZEALAND
(250kg~10t Nickel Plated Tool Steel) Australasian standard shearbeam. The PSB is a robust high accuracy shearbeam load cell, available in capacities from 250kg to 10t in tool steel electroless nickel plated. A very popular Australasian shearbeam where it has become the industry standard and the major OEM quality scale makers load cell of ...
Manufactured by:PT Limited based inAuckland, NEW ZEALAND
(250kg~5t, 500lb~10klb Nickel Plated Tool Steel) Shearbeam for general scales. Feature packed and technology driven, the PT5000 is an advanced high technology shearbeam. Our flagship design meets the highest standards worldwide. Manufactured in both imperial and metric capacities the PT5000 is approved in many jurisdictions around the ...
Manufactured by:PT Limited based inAuckland, NEW ZEALAND
(500kg~10000kg Nickel Plated Tool Steel) IP67 Shear Beam No 1 selling model. The LCSB is a tool steel shear beam sealed to IP67, electroless nickel plated and suitable for most weighing applications. We have trimmed all the non-essential fat off these load cells, however you can be sure that nothing has been trimmed from the actual load cells, they are precision tested and certified to meet all ...
Manufactured by:PT Limited based inAuckland, NEW ZEALAND
(125kg~1000kg Anodised Aluminum) Lower cost general shearbeam. A superb low cost weighing solution, yet surprisingly accurate with good long life features. The ASB is a shearbeam load cell with M8 threads on the 125kg model and M12 threads on the balance of the range. This is one of the most cost effective shearbeam cells available. Robustly constructed in design with carefully selected high ...
Manufactured by:PT Limited based inAuckland, NEW ZEALAND
Ideal for spare parts or matching an existing PT8000 weigh system as this model is no longer being produced. Limited capacities and quantities available. We recommend the LCBB for new installations. The PT8000 is a stainless steel bending beam load cell with welded construction sealed to IP68. Uniquely designed, the sensor allows for superior bellows operation through its full measurement cycle, ...
Manufactured by:PT Limited based inAuckland, NEW ZEALAND
(3kg~250kg Anodised Aluminum) standard, 350x350mm and 400x500mm platforms. A direct bolt replacement for most industry standard single point cells. The PT1000 is a dual designed model providing for increased capacities. The smaller cell is from 3kg to 35kg and at only 22mm high and 130mm long it's perfect for small low cost retail scales, medical and check weighing applications with platforms up ...
Manufactured by:PT Limited based inAuckland, NEW ZEALAND
(5kg~100kg Anodised Aluminum) Small bench scales and systems, 400x400mm platform. Our most popular single point model, used in high numbers in shop counter retail and bench scales. The PT2000 is available in 9 capacities from 5kg to 100kg. Industry standard design allows interchange with many manufacturers models. A popular cell for retail scale manufacture because of its generous platform size ...
Manufactured by:PT Limited based inAuckland, NEW ZEALAND
(50kg~635kg) Aluminium, Low Cost, 600x600mm to 600x800mm platforms, alternative to PT3000. The PTASP6-W is a high capacity single point load cell which is interchangeable with many models of this construction worldwide. Designed for direct mounting in weighing platforms or side mounted in some applications, it finds many uses in counting, check weighing and general bench weighing scales. Two ...
Manufactured by:PT Limited based inAuckland, NEW ZEALAND
(100kg~2000kg) Stainless, Affordable 600x600mm to 1200x1200mm platforms. The PTSSP6-F is a high capacity stainless steel single point load cell, sealed to IP65, Interchangeable with our aluminium PTASP6-F and compatible with many side mounted models such as the Tedea HOC model. Designed for platform scales, and hanging scales and found in packaging, closing machines/filling and convey or scales. ...
Manufactured by:PT Limited based inAuckland, NEW ZEALAND
(50kg~2000kg) Aluminium, Low Cost, 600x600mm to 1200x1200mm platforms. The PTASP6-F is a super high capacity single point load cell. A unique design allows for very large platform sizes up to 1200mm x 1200mm. Direct mounted in this design makes a low profile platform with one single load cell. This load cell is used in many other applications where a relatively small high capacity cell can be ...
Manufactured by:PT Limited based inAuckland, NEW ZEALAND
(2.5kg~50kg) Aluminium, Low Cost, 250x350mm platform, alternative to PT1000 3-35kg. The PTASP6-D is a fully sealed IP65 super low profile single point load cell with capacities from 2.5kg to 50kg. A favorite for small platform and bench scales both retail and ...
Manufactured by:PT Limited based inAuckland, NEW ZEALAND
(90t ~ 450t) Stainless Steel Canister Load Cell. The HCC is a fully welded stainless steel canister load cell with a protection level of IP68. Rugged construction houses a high accuracy measurement element which provides better than .03% combined ...
Manufactured by:PT Limited based inAuckland, NEW ZEALAND
(100kg ~ 50t Stainless Steel) Tank, Hopper, and Silo use. The PT7000 stainless steel mini-disk load cell is ideal for tank, hopper and silo weigh systems. Offering a high protection rating of IP68, it’s ideal for food hygiene and high wash down areas. The advanced welding technique used makes it the best low profile sealed stainless steel compression load cell we have ever ...